Pipes can easily be repaired without digging up your property using epoxy pipe lining lasting 50 years!

Pipe Lining Advantages

  • Seals cracks and holes
  • Seals bottomless cast iron
  • Fills missing pipes
  • Smooth's out big off-sets
  • Seals joint connections
  • Fixes Root damaged pipes
  • Repairs Under slab pipelines
  • 2"- 12" diameter
  • Infiltration/Exfiltration
  • Minimum Design Life 50 Years

InterSeal Pipe Lining

  • Repairs Lateral Connections
  • Re-Line Diameter Transitions
  • Average 3 to 4 Installs a Day
  • Seals with Existing CIPP Lining
  • Seal Open Joints
  • 6" to 24" Mains
  • No Digging in the Street
  • Meets ASTM F 1216 Specs
  • Minimum Design Life 50 Years

Point Repair Advantages

  • Bridge Missing Pipe Sections
  • Increase Flow Efficiency
  • Only System with Inner Liner
  • No Digging
  • Seal Open Joints
  • 2' to 30 ' Length Kits
  • 6" to 54" Diameter Pipelines
  • Formulated Epoxy Resins
  • Minimum Design Life 50 Years

Epoxy pipe Perma-Patch Advantages

  • No alarming odors
  • Used in doors or outdoors
  • Works on wet surfaces
  • Excellent bonding to existing materials
  • No-Digging
  • Access is utilized through existing clean-outs












Perma-Liner Pipe Lining System / Trenchless Pipe Liner Materials

Pipe linersWith Pipe Lining Equipment now we can rehabilitate existing building service pipelines in diameters from 2" to 8" in less then a day and in most cases less then 5 hours! This "true" inversion method allows the Perma-Lateral™ pipe lining materials to negotiate 22's, 45's and sweeping 90's with ease. Our lateral pipe liner material allows us to line through 4" - 6" transitions without changing the structural properties of the liner.

Only Perma-Liner™ pipe liner materials have a reinforced scrim to eliminate stretch during the inversion process. The reinforcement scrim allows the pipe lining to invert smoothly through the existing pipeline while preventing the pipe liner from stretching. We are able to line an existing pipeline without inverting into city sewer mains.

The Perma-Lateral™ pipe liner allows us to invert the liner through the existing building sewer pipeline to the city main sewer connection without stretching into the city sewer main. Normal felt liners without the scrim can stretch into the city sewer main and cause blockages that require emergency digging and/or robotic cutting devices.


Lateral Lining System - Trenchless Pipe Lining Equipment

Pipe lining inverterOur pipe lining system equipment is proven worldwide, and will meet your expectations in all pipe lining applications. We have chosen the best equipment, which is a direct reflection of experience and dedication behind the workings at Insta-Pipe.

Our lateral pipe lining air inversion units are made of pressure tested Aluminum with a site glass opening access port. Each inversion unit is attached to a removable 4 wheel dolly stand for easy transitions.

The standard inversion unit is designed for easy access and holds approximate 145 feet. The Standard unit can invert 2" to 8" diameters.

The Mini-Verter is designed for easy access into basements and confined spaces. While the Mini-Verter is compact, the unit can invert 50 feet of pipe lining material in one application.

The inversion process requires an inversion head. Each inversion head is sized to fit pipe liner materials. This will eliminate loss of air pressure during the inversion process. The inversion heads and caps are made of aluminum.

Insta-Pipe understands the importance of having the right tools and equipment on each job site. Your time is valuable…let an Insta-Pipe technician assist your needs!

Once the new pipe installation is complete, it is simply connected to the existing system. This code-approved and tested pipe is a completely root-proof, leak-proof, chemical and acid resistant pipe, with a minimum life span of 50 years!



Online estimate for trenchless pipe lining and repair services in your area click here.


InnerSeal System - Pipe Lining Equipment

InnerSeal System Pipe Connection repair

Insta-Pipe has an easy and non-intrusive way to correct Lateral Pipeline and Main Line Sewer Pipeline connection problems.

The InnerSeal™ Lateral Connection is a quality product for the rehabilitation of the lateral to mainline pipe connection point. The unique materials are designed to be placed from within the main sewer pipeline and launched into the lateral pipe, creating a water tight seal at the main / lateral connection point. The lateral is also lined at the same time correcting any damaged pipe sections and preventing roots from growing into the pipeline.

Epoxy pipe liner: The InnerSeal™ resin technology is 100% solids epoxy. This resin formulation is ambient cure and can be modified for hot water or steam curing. The ambient cure formulation has excellent bonding properties in all pipe materials and does not contain styrene. Our Epoxy pipe resin does not shrink and will seal off water infiltration during the application.

The InnerSeal™ Connection System can rehabilitate from 6” to 24” sewer mains with 3” to 8” lateral tie-ins. This system allows us to provide a structural pipe liner connection with 22’s, 45’s and 90 degree connections.

The InnerSeal™ installation is controlled from the operator’s station inside the enclosed trailer system. The operator can control the direction of the repair train and position the train into the lateral pipe connection. The operator’s station also allows full control of the inversion pressure in order to secure the pipe liner properly against the host pipelines.



Online estimate for trenchless pipe lining and repair services in your area click here.


Sectional Point Repair - Equipment

Sectional Point Pipe Repair

2

The sectional point repair pipe liners are manufactured and delivered in a complete kit form. Each kit is sized to suit the diameter, length, and external loads. This process involves attaching the sectional point repair pipe liner to a specialized bladder, then positioning the bladder over the damaged area inside the host pipe.

The bladder is then inflated and held in place until the thermo-setting resin is cured. Access points are required through upstream and downstream manholes. Prior to installation of the sectional point repair, the host pipe is cleaned and free of any foreign objects.This will allow adhesion to the host pipe material with the liner.

sectional pipe liner repairSectional Point Repair
The Perma-Liner Sectional Repair pipe liners can be installed in pipe diameters from 6 inches (152.4 mm) to 54 inches (1371.6 mm) in diameter and lengths from 2 feet (0.6096m) up to 30 feet (9.1440m). If a sectional point repair is positioned over a lateral junction, the junction can be re-opened with a specialized robotic cutter after the pipe is lined.

The Point Repair forms a structural, permanent waterproof repair which seals all types of pipe against infiltration and exfiltration. The finished epoxy lined pipe repair is stronger than the original pipe. This repair has a superior bond to the existing pipe equally in wet or dry conditions and because the resin is 100% solids, there is no shrinkage and therefore no annular space between the pipe and repair that could cause leakage. The repair system can be used equally well in warm or cold climates.


Online estimate for trenchless pipe lining or repair services in your area click here.


Perma-Patch System - Epoxy pipe repair Equipment

Perma-Patch System Epoxy Pipe Repair

The Perma-Patch system can repair sewer laterals with small cracks, holes or joint separations without excavation.

Through an open cleanout, a technician inserts a push cable and a reusable, inflatable bladder used to affix an epoxy-coated fiberglass mat over the damaged area. Once inflated, the bladder remains in place for three hours. When it is removed, the epoxy repaired pipe area is a structurally sound new pipe.

The Perma-Patch system is much quicker and cost effective than digging out a pipe and replacing it, and the epoxy pipe patch has a minimum life span of 50 years.

The epoxy pipe patch, designed for 4 and 6 inch pipes, is affixed with 100 percent solids epoxy resins that work even on wet surfaces. The resins come pre-measured. Low odor makes them easy to use indoors.

The resins are ambient cured; no external heat source is needed. Several patches can be installed in a day to repair multiple pinholes and crakes throughout the damaged pipe.


© 2011. Insta-Pipe. All rights reserved.
Olympia, Tacoma, Seattle, Washington Trenchless Pipe Repair Company

Insta-Pipe - Trenchless Pipe Repair
855 Trosper Road 190-204
Tumwater, WA 98512

Phone: 360-705-0451
Fax: 360-705-0617
Toll Free: 866-463-9747