Lateral Lining System - Installation Process

• The damaged pipe is cleaned and inspected.
  
• A measurement is then taken so the pipe liner material can be cut to length.
  
• The 100% epoxy resin is then mixed and poured into the liner material impregnating it.
• The pipe liner is then loaded into the launching unit.
• Then the pipe liner is inserted into the pipe through an inversion process that utilizes air pressure.
• This literally turns the pipe liner material inside out which allows the resin to bond with the host pipe.
• The resin cures within 3 hours.
• The pipe is put back into service for up to 50 years.

Once the new pipe installation is complete, it is simply connected to the existing system. This code-approved and tested pipe is a completely root-proof, leak-proof, chemical and acid resistant pipe, with a minimum life span of 50 years!

Online estimate for trenchless pipe repair services in your area click here.

(CIPP) Cured-In-Place Pipe Materials

Perma-Liner Lining System / (CIPP) Cured-In-Place Pipe Materials

Now we can rehabilitate existing building service pipelines in diameters from 2" to 8" in less then a day and in most cases less then 5 hours! This "true" inversion method allows the inverted lining materials to negotiate 22's, 45's and sweeping 90's with ease. Our lateral liner material allows us to line through 4" - 6" transitions without changing the structural properties of the liner.

Only Insta Pipe's liner materials have a reinforced scrim to eliminate stretch during the inversion process. The reinforcement scrim allows the liner to invert smoothly through the existing pipeline while preventing the liner from stretching. We are able to line an existing pipeline without inverting into city sewer mains.

Certified and Approved Materials!            
Insta-Pipe supplies its customers only certified third party tested and approved lining materials. Our scrim reinforced liner and 2-part formulated epoxy resin ensures your project is in accordance with city and state specifications. ASTM F1216 specifications require a minimum life expectancy of 50 years…our certified third party testing provides life expectancy 70 years plus!

The inversion liner materials consist of two layers of flexible needled felt and one layer of our scrim reinforcement, capable of carrying resin, withstanding installation pressures and curing temperatures. The material is designed to stretch in order to fit irregular pipe sections and negotiate 22's, 45's and sweeping 90° bends in all types of pipe materials.

The outside layer of the tube is coated with a 2 mil thick Polyvinyl Chloride finish. The tube is fabricated to a size that when installed will expand and tightly fit the internal circumference and length of the original conduit.
Our Transition Materials are made to order per each project. The materials can be manufactured to conform to transitions of 3" to 4", 4" to 5", and 4" to 6" pipelines. The materials are manufactured from the same materials used in single sized pipelines.

The thermal bonding process insures the best seam in the industry. Our seam is subject to a consistent dwell time, pressure and temperature. The automated process insures a stronger seam and more pipe flexibility. Competition uses manual flame bonding sealing techniques, which are subject to human error. Dwell time, temperature, pressure and continuous seaming are prone to failures when subject to potential human error. Manual flame bonding also adds stiffness, which reduces flexibility and creates inversion resistance.

Online estimate for trenchless pipe repair services in your area click here.

Lateral Lining System - Equipment

Our pipe lining system equipment is proven worldwide to meet your expectations in all applications and is a direct reflection of experience and dedication behind the workings at Insta-Pipe.

Our lateral lining air inversion units are made of pressure tested Aluminum with a site glass opening access port. Each inversion unit is attached to a removable 4 wheel dolly stand for easy transitions.

The standard inversion unit is designed for easy access and holds approximate 145 feet. The Standard unit can invert 2" to 8" diameters.

The Mini-Verter is designed for easy access into basements and confined spaces. While the Mini-Verter is compact, the unit can invert 50 feet of lining material in one application.

The inversion process requires an inversion head. Each inversion head is sized to fit liner materials. This will eliminate loss of air pressure during the inversion process. The inversion heads and caps are made of aluminum.

Insta-Pipe understands the importance of having the right tools and equipment on each job site. Your time is valuable…let an Insta-Pipe technician assist your needs!

Once the new pipe installation is complete, it is simply connected to the existing system. This code-approved and tested pipe is a completely root-proof, leak-proof, chemical and acid resistant pipe, with a minimum life span of 50 years!

Online estimate for trenchless pipe repair services in your area click here.